Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver
 
Marketplace
Classified Ads
Photo Ads
Tractor Parts
Salvage

Community
Discussion Forums
Project Journals
Your Stories
Events Calendar
Hauling Schedule

Galleries
Tractor Photos
Implement Photos
Vintage Photos
Help Identify
Parts & Pieces
Stuck & Troubled
Vintage Ads
Community Album
Photo Ad Archives

Research & Info
Articles
Tractor Registry
Tip of the Day
Safety Cartoons
Tractor Values
Serial Numbers
Tune-Up Guide
Paint Codes
List Prices
Production Nbrs
Tune-Up Specs
Torque Values
3-Point Specs
Glossary

Miscellaneous
Tractor Games
Just For Kids
Virtual Show
Museum Guide
Memorial Page
Feedback Form

Yesterday's Tractors Facebook Page

  
Farmall & IHC Tractors Discussion Board

Re: F-20's


[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]

Posted by Bill Smith on February 06, 2003 at 12:11:34 from (63.147.130.31):

In Reply to: F-20's posted by lincoln on February 05, 2003 at 11:04:24:

The F-20 was realeased from factory with the magnito as the only elctrical item on tractor. All of them were hand crankers from factory. I have heard story's of the latest ones, 39 and perhaps 38 with the battery start. Not sure if this was actually a factory option. I have heard both ways that it was and that it wasn't. I would say that finding one with battery start would be a rare occasion in any circumstance. The F-20 is truely a neat tractor. Heavy built, lot of neat charectoristics, and antique. The key to no kick backs when hand cranking is to, have tractor timed correctly, have the mag set in start up position with the impulse in working order, and don't overchoke. With those guidlines the tractor will rarely kick back. 95% of all injuries from hand cranking are caused by operator not cranking the engine in a safe manner when the tractor happens to kick back. Most people think that grabbing the crank and going in a circular motion like they do in cartoons is the proper way to crank. It is quit the contrary. That is about the most dangerous way to crank. Here is about the safest way to crank start an F-20. Make sure tractor is in nuetral, turn gas on if shut off, open throttle up slightly, put mag advance in the start up position, adjust choke lever if choking is nescisary (will need to release the choke at proper time when you start cranking). Now then, stand in front of tractor facing the front of tractor with all body parts (legs, head and so on) in front of the 360 degree rotation of the crank handle. With right arm, grab the handle of crank with the thumb on the same side as fingers, push the crank and the shaft inward to ingage into the crank shaft, and pull upward as fast as possible. Only pull upward. The impulse of mag should snap and mag will throw fire to engine when crank handle is slightly over the top of rotation. Don't crank much past the activity of mag but be sure there is some turning motion when the mag impulse trips. If tractor doesn't fire and start, disengage the crank by reversing the motion down to the bottom. Engage the cranke agian and pull upward as you did before. Don't ever push down. You may have to give it several pulls before it will start but a F-20 in good working order should fire right up in 1 to 3 or 4 pulls. Just make sure you don't overchoke, and the mag impulse is clicking. After tractor is started, adjust the spark advance to the run position and don't forget to put the crank someplace where it won't be lost. I put mine in the gap between the tool box and gas tank support.


Follow Ups:




Post A Followup

:
:

: Re: Re: F-20's

:

:

:

:

: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Today's Featured Article - Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro ... [Read Article]

Latest Ad: Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request [More Ads]

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy