Farmall & IHC Tractors Discussion Board |
Re: Re: IH300 utility hydraulics/power steering
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Brett on January 27, 2003 at 16:19:30 from (65.59.78.133):
In Reply to: Re: IH300 utility hydraulics/power steering posted by jmyt_47@MN on January 27, 2003 at 08:35:38:
basically the difference is the other tractor had power steering and mine does not.I have one valve that bolts through the regulater block into the tank. This is for the hitch.Then I have two original IH valves for the loader that also through bolt into the tank.The steel line runs from the loader valve to the hitch valve and then it used to go into the back of the safety reg block where the priority valve would be if Ihad power steering.whichmakes me believe this was the supply for the power steering.But i am not sure. THANKS FOR ANY HELP YOU OFFER
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|