Farmall & IHC Tractors Discussion Board |
Re: Farmall H live hydraulics updates...
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Wardner on January 24, 2003 at 22:01:59 from (65.235.132.176):
In Reply to: Farmall H live hydraulics updates... posted by Steven@nd on January 24, 2003 at 18:49:26:
Click the link below. Wouldn't it be easier to do it this way? The pump is rated for 15 gpm. If I need more hydraulic I can also replace the housing between the M&W pump and timing cover plate with a SH-350 pump. That's good for another 10 gpm. I will probably do that someday but I will need to change some gears. I will use a gas starting tank and bracket from a WD9-650D or TD-14 for the reservoir. It will bolt in where the smaller H starting tank is now. This way I can retain the Lift-All. I don't anticipate the need for a cooler. One would have to extract alot of continuous hp from the hydraulic fluid to need it.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|