Farmall & IHC Tractors Discussion Board |
Re: Trailer wiring
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Chances R on January 18, 2003 at 07:44:18 from (64.12.97.13):
In Reply to: Trailer wiring posted by K.B. on January 17, 2003 at 19:04:15:
I will guess that you have a hot wire coming back from your truck that is normally use for powering lights in a enclosed trailer. Chances are that you have the trailer brake connected to this. While the truck is not hooked to the trailer, I have found out what wire is what on the trailer plug is by taking a nail and hook it to the positive side of a battery charger and press in each hole one at a time. You will have a left turn, right turn,running lights, trailer brakes, and a ground or 2. I must admitt the last time that i wired a brake controller, I had to tak e it to the pros to adjust. The reason they had the wrong instructions with the controler.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|