Farmall & IHC Tractors Discussion Board |
Re: hauling
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob M on January 08, 2003 at 19:25:50 from (24.169.120.229):
In Reply to: hauling posted by Jcnc on January 08, 2003 at 14:00:52:
Recommend loading first the truck to it's GVW rating. Additional load should then go on the trailer (but not to exceed to the GCW rating of the truck). Reason is this: In less than ideal driving conditions (slippery road, high cross winds, rough highway, etc) - also in an emergency stop situation - you want as much of the combination's weight as possible on the tow vehicle to insure good vehicle control. If too much of the combination weight is on the trailer you dramatically increase the risk of trailer sway, jackknifing, etc. Next time you see a semi flatbed, dry van or dump truck running with a partial load, notice where the load is positioned: At the front of the trailer. This is to put as much of the load as possible on the tractor. Safe vehicle control the reason why!
Follow Ups:
Home
| Forums
Today's Featured Article -
Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|