Farmall Tractors Discussion Board |
Paulson (sp) loader
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by Pat Williams on August 29, 1999 at 20:41:16 from (208.130.144.11):
I posted a question earlier (thanks for the responses) about loaders for an M. I've found a loader that appears to be in pretty good shape and operates very well. The only problem I have is that it is on an H. Doing some very rough measuring I think that the frame on an H is about an 1 1/2" narrower than on an M. On the loader there are two pieces of 1 1/2" channel (spacers) bolted onto the front which I beleive could be discarded but there arent any on the back part of the loader. I dont have a problem making new mounting brackets for the back side (basically cutting out 1 1/2" of the loader frame and welding in new mounting plates) but Im wondering if there should some spacers on the back side for an H. My only other question as to whether or not this loader will work for me is the difference in height between an M and an H. Is this going to be a problem? Any help would be greatly appreciated. Thanks!
Follow Ups:
Post a Followup
|