Farmall & IHC Tractors Discussion Board |
Re: IHC 656 Gas
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Yellott Canby on December 13, 2002 at 18:02:19 from (216.158.80.44):
In Reply to: IHC 656 Gas posted by John Pawlicki on December 13, 2002 at 17:46:19:
Hello, I own a 656 gas 1966 model. It is a narrow front end 3 point hitch. I use it for the majority of my work from grinding feed to planting to mowing with a 15 ft batwing. Two years ago I did a major out of frame rebuild on it. It had last had bearings put in 1972 according to the date on the bearings. I changed the sleeves and everything else. The tractor has around 5000 hres on it. Six thousand seems a bit high to me but the loader is worth a fair amount. I would like to have a loader for my 1466. You may want to take an oil pressure gauge and screw it in to one of the plugs along the oil passage to check the pressure, as the tractor is only equiped with a light and may not be right anyway. Good luck. They are good tractors, the gas ones will start in the bitterest weather. May need that directly. YC
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|