Farmall & IHC Tractors Discussion Board |
Re: H hydraulics
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by The Undertaker on December 02, 2002 at 08:32:39 from (64.40.66.163):
In Reply to: H hydraulics posted by SteveW/swMI on December 01, 2002 at 06:31:51:
Steve! I've a 40 H with Work Saver 3pt hitch. I mounted two Lion 2500 3" X 8" Cylinders to it. Run hose from right side Lift-All to bottom (Cyldr end) on right side of hitch, and from front outlet of Lift-All to bottom (Cyldr end) on left side of hitch. However, because of using double action cylinders I had to install vent plugs to each cylinder at their piston end for what would otherwise would been recirculating hose connections. As "Red asked", it may well depend on what you want to use it for, but I've used the above set up with a 570 lb BEFCO 6ft grooming mower and has worked just great. "TU"
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|