Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Hydraulic Pressure
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Scott Swanson on October 17, 2002 at 10:27:10 from (209.180.31.9):
In Reply to: Re: Re: Hydraulic Pressure posted by Layle Willis on October 17, 2002 at 10:17:17:
I think you should be able to lift 500 to 600 pounds. If your pump is an improved one, you should be able to lift more like 800 pounds. Be aware that the loader will work only if the clutch is not pressed in. The belly pump runs off of the counter shaft in the tranny. It is not Live. There is a way to make it double or triple acting but I am unsure of the procedure. It needs extra spools to do that. If you only use the belly pump and its related controls, it will only be a lifting bucket. Weight will have to bring it down. You will need a trip loader. I am sure more people will sign on and help you out. My knowledge is limited as well. I am in the same boat as you.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|