Farmall & IHC Tractors Discussion Board |
Re: Timing 460D
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Gatzz on October 09, 2002 at 17:04:31 from (12.64.228.27):
In Reply to: Timing 460D posted by David on October 08, 2002 at 20:56:15:
I also have a 460D that I restored. I think you will be ok to install the pump with the dots lined up but after you get it installed you will have to static time it. To do that get # 1 to come up on comp. and stop at 3 BTC. Now take off little timing window on the side of the pump and you should see 2 marks. Turn the pump until the marks line up with each other and tighten down pump. If you only see one mark you maybe 180 out. Also the back mark is stamped in and the forward one is usually a scribe mark. Someone correct me if this isn't right.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|