Farmall & IHC Tractors Discussion Board |
Temp Gauge on 806
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Ken T. on September 09, 2002 at 16:47:27 from (209.62.163.45):
The coolant temperature gauge does not work on my 806. It never moves off of "Cold". I had some time on my hands the other day and started looking into it. I located the temperature sensor (thanks to K.B.) on the cylinder head. There is a spiral steel coiled shield that goes all the way from the temp sensor to the gauge. I thought this would contain electrical wires. After examining the gauge, I found there was no other connections at the gauge other than this coiled shield. There is a nut at the point where the coil shield joins the gauge so I unthreaded the nut. I then pulled on the coil shield to see if I could remove it from the gauge but found that I could not. I discovered that if I moved the coil shield around, the needle in the gauge also moved around as if they were mechanically connected. This lead me to believe that maybe the temperature sensor is actually some kind of coiled up bi-metal spring and there is a cable inside of the coiled shield, and the other end of the cable is fixed to the needle on the gauge. Since my gauge doesn't work, maybe the cable is broken or something like that. Am I correct about my assumptions as to how the temp sensor and gauge work? If not, just what kind of mechanism is this temperature sensor and gauge?
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|