Farmall & IHC Tractors Discussion Board |
Re: F4 Mag
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Mr. J on September 06, 2002 at 21:54:13 from (64.200.52.204):
In Reply to: F4 Mag posted by Andy47 on September 06, 2002 at 09:43:29:
Andy, Maybe you could think about rebuilding the magneto yourself. As long as the magnet is still good, the rebuilding process for the magneto is very simple....Basically, what you would need is the following: Point set, coil, condensor, rotor, and cap. You can get those at about any auto parts store for a lot cheaper than you could have one rebuilt. However, if you are not mechanically inclined, Jack Chandler at www.magneeders.com is an expert in the field of magnetos. His shop is about a 10 minute drive from where I teach. But, the magneto is a lot simpler than many people think, and I think that with any mechanical inclination at all, you could do it yourself. I have my students rebuild their own magnetos. We've rebuilt Fairbanks-Morse, IH F-4 and H-4 and J-4, as well as one from a dang ol 2 cylinder. Good luck with whatever you decide....This forum would be more than happy to walk you through a rebuild I'm sure! Jared Jeffries Jasper, MO FFA Advisor
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|