Farmall & IHC Tractors Discussion Board |
Re: Seal replacement on H
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by The Red on August 31, 2002 at 04:39:19 from (12.84.239.253):
In Reply to: Seal replacement on H posted by Kelly C on August 30, 2002 at 20:40:04:
Kelly, probably both the main driveshaft seal and the countershaft seal are leaking. The easiest way to tackle it is to drop the liftall so you have more room. You will need the 2 seals and the gaskets for the seal retainer assemblies. Plan on a 1/2 day job. The biggest headache I have found is trying to pull off the transmission coupler off the main transmission shaft. You might have to rig up a puller to get it off. For some reason the parts book shows the main shaft with a keyway. Every H I have worked on has a spline shaft that the coupler slides onto. If it is difficult to get off, make sure you file any burrs on the coupler and the shaft before you stick the coupler back on.
Follow Ups:
Home
| Forums
Today's Featured Article -
Picking Corn - by Rick Nikolich. It was the day before Christmas shutdown at work and I asked our lead engineering expert Scott Andrzejewski what he was going to do over the holidays. He said that he had some corn that he still needed to pick with an antique one-row New Idea corn picker. Scott has a nice farm about an hour north of Lansing in St. Johns, MI. He wanted to get the rest of his corn in by the next day (Christmas Eve). We had about an inch of new snow on the ground and single digit temperatures. So in the bac
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|