Farmall & IHC Tractors Discussion Board |
Re: I bought a plow and duals, now how do I set up the hydraulic hoses?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Doc on August 30, 2002 at 20:54:20 from (24.118.181.247):
In Reply to: I bought a plow and duals, now how do I set up the hydraulic hoses? posted by Tim Malin on August 29, 2002 at 18:26:20:
For the hydraulics do you have a belly pump or the line hydraulics? A super M with the live system will have a break away coupling on it. You would then need hoses and a cylinder. If you have a belly pump, the simplest way is to run a hose to one of the belly pump outlets and to the UP side of the cylinder and put a vent in the other end of the cylinder. This will give you power up and gravity down which will work well with a plow. There still is not a true break away coupler as the old IH system. You're plow has a break away hitch so you may want to figure something out. email me if any questions. I just put 2 wat hydraulics on my M and can give you some pointers if you need. Also a dual on the left for plowing makes for a good looking rig, gives better traction, and a better ride. Go for it. Doc.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|