Farmall & IHC Tractors Discussion Board |
Re: Farmall 400 hydraulic mess
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by jmyt_47 on August 28, 2002 at 07:37:52 from (170.92.1.104):
In Reply to: Farmall 400 hydraulic mess posted by Dana on August 27, 2002 at 19:45:52:
Souns like you have multiple problems. You may need to clean out the hydraulic system. I just rebuilt my 300's hydraulics. The most expensive part is the pump, the rest is pretty cheap(orings and internal components). It sounds to me like you have little or no oil in the system, or the loader is plumbed wrong to the tractor's hydraulics. Pull the side panel off the tractor. There are some extra plugs on the port block(hydraulic ouputs) located on the adjacent face. Otherwise, maybe one of you metal lines is leaking, which you could replace or fix by welding/brazing(of course I would advise removing it from the tractor first.
Follow Ups:
Home
| Forums
Today's Featured Article -
New Life for an Old Allis - by Tyler Woods. My friend Jon, has an old '39 Allis Chalmers B. He thought it a marginal tractor that had long since served its time. She smoked terribly and never had much power but he couldn't afford another so he was limping along with what he had. Jon's Allis has a small front loader and though it doesn't carry much, it serves his needs. It was the hard starting and low power that made him think it was time to replace the old girl. Jon called me to help him discover why his tractor wouldn't start
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|