Farmall & IHC Tractors Discussion Board |
Re: 300U Hydraulics Mystery - HELP!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by dick on August 07, 2002 at 21:16:03 from (209.245.10.77):
In Reply to: 300U Hydraulics Mystery - HELP! posted by Bob Kirk on August 07, 2002 at 14:55:00:
It sounds to me as though you have a plug somewhere around the control valves for the loader (I assume the bucket doesn't rotate either?). With power steering, the pressure line should be external tubing with the loader's control valves mounted on the reservoir forward of the Fast Hitch control valve - if it's hooked up according to IH's original design. If not, your system isn't standard and you probably need to describe it further to get much help here. Assuming the IH design, does the pump load up when you toggle either or both of the loader's control valves? If not, there's probably a plug in either the control line (smallest port joining to the loader control valves on the side of the reservoir - most likely) or in the return line from those control valves to the reservoir (not very likely). As far as the oil leak goes, you need a new O-ring, but I don't think it has anything to do with the loader problems. The buzz may mean a short life-expectancy for your pump - hard to say. Hope some of this is helpful. Repost if more input might be helpful.
Follow Ups:
Home
| Forums
Today's Featured Article -
An Old-Time Tractor Demonstration - by Kim Pratt. Sam was born in rural Kansas in 1926. His dad was a hard-working farmer and the children worked hard everyday to help ends meet. In the rural area he grew up in, the highlight of the week was Saturday when many people took a break from their work to go to town. It was on one such Saturday in the early 1940's when Sam was 16 years old that he ended up in Dennison, Kansas to watch a demonstration of a new tractor being put on by a local dealer. It was an Allis-Chalmers tractor dealership,
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|