Farmall & IHC Tractors Discussion Board |
Re: 47 Farmal A , Can not shift into 1st or 2nd .
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by big fred on July 08, 2002 at 19:30:50 from (65.219.139.43):
In Reply to: 47 Farmal A , Can not shift into 1st or 2nd . posted by Todd Davis on July 08, 2002 at 19:02:49:
Sounds like there's a problem with one of the shifter forks. Take the cover off the transmission, the shifter comes with it. Then examine the shifter forks, might be something simple, but I would guess your fork is busted. If that is the case, you'll have to either get it welded back together, if the pieces are there, or get one from a salvage yard. When it comes time to put the cover back on, make sure none of the gears are engaged (transmission in neutral), then set the shifter in neutral (the notches in the shifter rails line up) and carefully set it down on the transmission case. Check all 4 gears by hand before you start the engine.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|