Farmall & IHC Tractors Discussion Board |
Re: Confusion about pushing snow with a blade
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by joe on June 24, 2002 at 11:07:17 from (66.43.207.226):
In Reply to: Confusion about pushing snow with a blade posted by Grampsold544 on June 24, 2002 at 05:26:32:
Going forward will work fine. I use a 300U in the winter, do not start going in reverse until the snow gets a few feet deep. On gravel, you will want to leave half an inch of snow or so in any case, unless you want to take a lot of gravel with you. And traction is a lot better (in the winter) on gravel with a bit of snow on it as compared to pavement with a bit of snow on it, in my opinion... the sharper edges of the limestone help your tires grip some. But anyways, like some others said, you'll want tire chains, wieghts, and a nice big blade.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|