|
Farmall & IHC Tractors Discussion Board |
IH 826 engine conversion?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by David C. Anderson on June 22, 2002 at 10:01:03 from (216.114.215.39):
This spring I unfortunately discovered our trusty IH 826 diesel (358 cid) with about 7,300 hours had coolant leaking into the crankcase. That tractor is used around 60 hours per year for: planting (half throttle), stalk chopping (PTO speed), some dragging (1/2-3/4 throttle), pulling grain wagons ( various throttle settings), and loader work ( alot of idling). That diesel has always been tough to start in the winter up here in Minnesota and often time it probably never gets up to operating temp. in the cold weather. Given the jobs this tractor currently performs and the low hours of use might I be better off swapping for a gas engine as opposed to overhauling the diesel? The rest of the tractor is fine. In speaking with my local IH service manager a gas engine (301 cid) out of a 806, 826, or 856 should bolt in OK and I'm sure would be much easier starting in the winter. What is the availability and reputation of that engine and what could I expect to pay for one In decent condition?
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
