Farmall & IHC Tractors Discussion Board |
Re: cracked head on B
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Diesel Don on June 17, 2002 at 10:24:30 from (141.129.1.114):
In Reply to: cracked head on B posted by Bill Ramsey (bigcer) on June 16, 2002 at 20:28:05:
I recently had the head for my '34 Chev truck metal spray welded.The crack went through #2 exhaust valve seat.They repiared the crack and because of the location of the crack they needed to install a new valve seat insert.I had them go ahead and do all the valve seats.Whole job cost was $350.The tractor head may be cheaper because it is only a 4cyl.Just trying to give you an idea of how much you will pay for a repair job.The good thing about going this route is you will be almost sure of getting a repair that will work because they clean the head by hot dipping and pressure test it when completed.They can also do some testing to assure there are no other cracks that are not readily visible.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|