Farmall & IHC Tractors Discussion Board |
Re: what's the socket size for spark plug on 560?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by J.D. on May 17, 2002 at 11:32:56 from (205.162.22.120):
In Reply to: what's the socket size for spark plug on 560? posted by dvtw on May 17, 2002 at 11:18:14:
You will need a 7/8" deep well thin wall socket. There isn't much room between the plug and the cylinder head so it has to be a thin wall socket, or a normal one ground down to fit. Both the Champion and AC version of these plugs use a metal gasket for sealing. Make sure you don't have any dirt or grit in the threads or on the sealing surface on the head. If the threads are dirty or damaged and the plugs go in hard, you may want to use a thread chaser on them. Sorry I can't help you on the seals. Good Luck, J.D.
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|