Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: need help making towbar to pull MD home
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Walt in Jaxn, Tn. on May 16, 2002 at 16:13:24 from (24.159.77.34):
In Reply to: Re: Re: Re: Re: need help making towbar to pull MD home posted by kjm on May 16, 2002 at 14:40:46:
study the transmission to see if the driven shaft runs in oil, or the drive shaft runs in oil. the drive shaft is connected to the clutch. the driven shaft is connected to the pinnion that turns the planetery gear that turns the bull gears and axels. the tractor wasn't meant to be pulled. my brother and i pulled a f-30 6 miles home behind a jd 60. the bearings got dry and let me know they needed oiling, so i had my brother stop so i could put it in gear and run with the clutch pushed in and in high gear. this might not mean anything but the h and m share alot of technology (and parts)with the 20 and 30 if the shaft that will turn when you pull it is high and out of oil, it will get dry-----walt
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|