Farmall & IHC Tractors Discussion Board |
450 power steering, HELP!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by J.D. on May 16, 2002 at 12:57:08 from (205.162.22.32):
I'm working on a 450 gas with a narrow front. No power steering unless using one of the hydraulic levers. I have already rebuilt the regulator/flow control valve. I checked the pressure at the power steering supply port and it pegged the 1000 psi gauge I was using. I now have the Behlen P/S unit off and disassembled. Nothing appears to be terribly wrong with it other than some wear on the roll pins. There aren't any grooves on the shafts and the balls, spring, and valve appear to be in good shape. What else should I check before I put it back together? Is there anything critical about the installation that could be causing the problem? This thing is driving me crazy and for me that's a short trip! Thanks for any help you can give. J.D.
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|