Farmall & IHC Tractors Discussion Board |
Re: Help with International implement, please.
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Michael Soldan on May 12, 2002 at 17:28:01 from (216.46.130.10):
In Reply to: Help with International implement, please. posted by Tom/Idaho on May 11, 2002 at 09:35:02:
Tom, I pull the knife, take my angle grinder as someone else suggested and in seconds have the heads off of the rivets, the punch them out. I have a piece of railroad track about a foot long, lay the rivets through the knife and the section and two or three good cracks with the ball peen hammer and they are on there.That angle grinder works great for sharpening the knife as well, stand it up do one side of each section all the way down, turn it upside down and sharpen the other side of the sections all the way down. I maintain my own sickle mower and my friend brings me his to repair all the time. I keep sections and guards in store as well as rivets. It wont take long to change sections and maintain your mower, good luck from Mike in Exeter Ontario
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|