Farmall & IHC Tractors Discussion Board |
Update: Help on loosening exhaust manifold bolts!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by dvtw on May 03, 2002 at 06:12:41 from (136.205.16.3):
Thanks to everybody who posted tips. Lastnight I decided to get a headstart on the project (taking exhaust manifold off 560 Farmall). I took the carb off and decided to try a few of the bolts to see if they would move. Here's the status: Of the 8 bolts holding the manifolds on I managed to get 4 out with no problems. I switched over to a metric 14mm to get a snug fit on the bolt heads. The bolts are not rusted in the manifold, they appear to be a copper/brass color and in good shape. They have 5 written on the heads of them. Is that the original bolts? Of the 4 that are left, 1 is rusted so bad I have yet to find a socket or wrench to fit the head. The 3 others are stuck pretty good and I have begun to round off the heads on them. They are not completely rounded yet but I don't think they are coming...yet anyways. I gave them another good dose of the ol' liquid wrench to sit till Saturday. I'm going to try and form the heads up with a file and apply some heat for these 4 that are still stuck. So far, no broken ones!!!! Thanks again for the help.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|