Re: Re: Re: Mounting a Belly Blade on a super A

Posted by Haas on April 13, 2002 at 12:12:35 from (129.37.117.124):

In Reply to: Re: Re: Mounting a Belly Blade on a super A posted by ric anderson on April 13, 2002 at 06:53:35:

Oops, I guess you were talking about the grader blade that mounts either on the front, or under the belly. Just came from an auction where there was a Super A for sale that had one of these. I also used to have one, but always had it on the front. Not sure how to mount under the belly. There is a bracket that mounts through the Cultivator attachement point just behind the steering gear. A brace goes back and mounts to the side of the bell housing. The blade then mounts to the bracket under the axle with a big pin. The lift arm for the blade attaches to the bracket and then a rod with a spring for down pressure goes to the rockshaft arm of the touch control. I think to mount under the belly, the bracket mounts to the cross member used for the swinging drawbar, but not sure exactly how that works.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Mounting a Belly Blade on a super A Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]