Farmall & IHC Tractors Discussion Board |
Re: 140 governor
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by JOE CADDEN on April 12, 2002 at 07:56:25 from (152.163.197.66):
In Reply to: 140 governor posted by jman on April 10, 2002 at 11:24:29:
REBUILT MY CARB LAST YEAR. FOUND THAT THE LENGHT OF THE GOVERNOR LINKAGE IS CRITICAL TO THE PROPER OPERATION. DUE TO POSSSIBLE CHANGE IN CENTER TO CENTER DISTANCE BETWEEN GOV. AND CARB. DUE TO CARB REMOVAL OR REPLACEMENT WITH THE ENGINE STOPPED 1 ADVANCE THE SPEED CHANGE LEVER ABOUT 3/4 FULL THROTTLE. 2 DISCONNECT CONTROL ROD FROM CARB 3.HOLD CARB THROTTLE AGAINST ITS WIDE OPEN POSITION 4 MOVE GOVERNOR ROCKSHAFT LEVER TO REAR OF ITS TRAVEL AND ADJUST LENGTH OF GOVERNOR-TO- CARB CONTROL ROD SO THAT IT MAY BE RECONNECTED FREELY WITHOUT MOVING THROTTLE LEVER OR GOVERNOR LEVER I.E. ONE COMPLETE REVOLUTION COULD MAKE THE DIFF ERNCE IT TOOK ME ABOUT 3.5 TURNS THIS SHOULD HELP A BUNCH!! JOE
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|