Farmall & IHC Tractors Discussion Board |
Re: HEY Steven@ND!!
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Steven@nd on April 05, 2002 at 05:15:43 from (12.23.184.8):
In Reply to: HEY Steven@ND!! posted by Mike ISW on April 04, 2002 at 20:06:09:
I spent about 45 minutes at the local Hedahl's trying to get something rigged up for this gauge. I will list the part numbers and prices just in case you have a Hedahl's near you. 1/4" x 40" brake line (AGS BL440) $2.89 [I was going to go with a 30" brake line but the original oil line is about 35" so 40" was the next step up - I'm sure there will be room to put an extra loop in if I have to.] 1/8" adapter (EDE 203200) $1.04 [this is a coupler that has 1/8" tapered female on both ends, screw this onto the back of the gauge] 1/4" x 1/8" elbow (EDE 122420) $1.13 each, you need 2 of them. [one of these screws into the adapter on the back of the gauge, it has 1/8" taper and 1/4" brake line fitting. The other one screws into the block behind the oil filter case so that you can hook up the brake line there.] Here are some pics:
This is the end of the line that will go to the block.
This is the other end hooked to the gauge.
Another shot of the gauge end.
This is the whole unit set together.
These are the necessary fittings, along with the brake line.
Hope this helps someone out! Steven
Follow Ups:
Home
| Forums
Today's Featured Article -
Women and Tractors - More Views From the Farmer's Wife - by Teri Burkholder. The top ten reasons why the judges wouldn't let you participate in the stock antique tractor pull: Hey, this is stock! It came with that V8 in it! That "R" on my tires stands for "really old" not radial! Blue gas? We thought it was a pretty color! What wire hooked to my throttle?
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|