Farmall & IHC Tractors Discussion Board |
Re: Plowing with an H?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Roger on March 28, 2002 at 20:00:04 from (198.31.223.222):
In Reply to: Plowing with an H? posted by Krey in Indiana on March 28, 2002 at 15:46:51:
Krey, I have plowed with both a pull type and mounted plow with my Super H. I think the pull type plow does a better job for plowing larger fields, but I bought a two bottom three-point to mount on the three-point after market hitch I have on the Super H. It works real well for plowing gardens; because you can get in tight spaces and can easily plow in one direction by backing up across the garden. The problem with the three-point plow is controlling the depth. When you get to the end of the field, the plow comes out of the ground when the right wheel comes out of the furrow. So you have to do some jockeying with the hydraulic controls to get it to plow uniformly. Hope this gives you some more insight. Also, we used to pull 3-14's on the farm in South Dakota with the Super H. Plowing 60 acres with that plow took days! Roger
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|