Farmall & IHC Tractors Discussion Board |
Re: SMTA hydraulic pump problems
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tom on March 13, 2002 at 04:24:10 from (198.108.134.96):
In Reply to: SMTA hydraulic pump problems posted by boog on March 12, 2002 at 21:40:03:
Boog, I am not an authority on the SMTA hydraulic system. I do know that the lift-all control rod has to be engaged (pulled back) and latched for the remote hydraulics to function. If it is not pulled back, oil is by-passed and does not flow through the remote valve. Consequently, there will be no pressure reading at the remote connections. The pump may be starving because of low fluid level in the system and reservoir. Our SMTA has a separate pump for the power steering and is independent of the tractor hydraulic system. Not being familiar with the Behlen P.S., I am unable to comment as how to correctly connect your power steering to the tractor system. Best wishes and keep us posted. Tom
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|