Farmall & IHC Tractors Discussion Board |
Re: 560 G hydraulic problems
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RPM on February 22, 2002 at 07:23:46 from (63.110.182.225):
In Reply to: 560 G hydraulic problems posted by jeff on February 22, 2002 at 06:15:23:
First are you using the valves on tractor or do you have a separate loader valve, If you are using tractor valves, are you taking apart the valves and examining them or just putting them on, assuming they are ok, particularly the regulator and safety valve, take the cap off, its the one with 4 bolt rectangular cap, inside you will find a piston, make sure its not scored, if it is polish it with fine emery, check/replace oring on it, in the other bore is a spring, check it out, also in top there is a oriface screw/screen that you need to unscrew with common screwdriver, screen will plug and collapse, its nothing complicated just the process of elimination, make sure Hytran is up to correct level, fresh filter, while you have filter out check for filings or strange metal parts in the filter and hole it sits in. If you find any get to the source because it will circulate right back into what you just fixed.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|