Re: Int. 504 No spark at points.(Help!)

Posted by Matthew on February 10, 2002 at 10:15:12 from (64.68.163.39):

In Reply to: Int. 504 No spark at points.(Help!) posted by Scott Pahos on February 09, 2002 at 18:38:05:

Do you have 12 volts at the points with just the switch on? The only time you should have 12volts at the points is when you are cranking the engine. There should be just a tad over 6 volts with the switch on. If not you have a problem with the resistor. Do you have a 2 wire solenoid? There should be a wire on the R terminal. This gives you 12 volts at start up. When the solenoid kicks off after start up, then you should have less than 12volts. If you have 12 all the time that's why your points are burning.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Int. 504 No spark at points.(Help!) Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]