Farmall Tractors Discussion Board |
Farmall M Compression
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by JustinB on May 19, 1999 at 20:50:18:
I posted a message a few days ago reguarding my lack of reading on my compression tester. I figured out the problem. The plastic cover was pushed against the needle of the guage. I fixed that and retested my compression. Here are the results: Cylinders 1 - 105 psi 2 - 108 psi 3 - 115 psi 4 - 115 psi All cylinders seem to be within 10% of each other. Is that pretty good compression for an M. I would appreciate any opinions. Thanks!
Follow Ups:
Post a Followup
|