Farmall & IHC Tractors Discussion Board |
Re: No Oil Pressure on rebuild
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Patrick Martin on June 18, 2007 at 21:53:04 from (64.154.26.250):
In Reply to: Re: No Oil Pressure on rebuild posted by Bob on June 18, 2007 at 21:37:41:
Never heard that for any type of gear type impeller pump. I can see it being cool for a suction pump or if you only applied a heavy coat of lube but not a complete packing job. I would say especially so if there is less than 5 quarts of oil weight above the pump level. That oil weight creates an essential backpressure to force the assembly lube forward through the ports through the filter and into the galleys to the tappets and valves. Really a thick assembly lube will create a gel like constriction on a paper/fiber media oil filter element and slow oil flow until it dissipates. Packing the pump housing really won't do much anything for this type of submersion pump. If you can get it to flow through the pump it will only accumulate in the filter and create a restriction like above. Oil or a moderate coat of lube is best because after all the pump will be completley immersed.
Replies:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|