Farmall & IHC Tractors Discussion Board |
Re: 966 Clutch Trouble
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on June 12, 2007 at 20:59:45 from (75.19.120.214):
In Reply to: 966 Clutch Trouble posted by chadd on June 12, 2007 at 20:47:53:
If you fallowed my advice to the letter and adjuted the dump valve with the clutch pedal down to the stop and SCREWED THE DUMP VALVE IN TILL THE LITE JUST COMES ON then let the pedal up and ADD ONE MORE COMPLET TURN IN and lock down it is wright as it can be and if it is not then i have KNOW IDEA what is wrong as i am not there to check and set it myself. So if ya have 9/16th's to 5/8ths free travel on the pedal on a Hyd assist clutch it is fine if you have a standard clutch linkage then ya need the 5/8ths free travel and everything else is set the same clutch brake and dumpvalve.
Replies:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|