|
Farmall & IHC Tractors Discussion Board |
Oh-oh!
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by A. Bohemian on April 25, 2007 at 14:38:25 from (207.170.88.157):
In Reply to: Re: 3588 water in oil - where to start? posted by chadd on April 25, 2007 at 13:33:59:
A tractor with coolant in the oil should NEVER be run until the problem is fixed. Otherwise, you'll start to hear those bearings "knock, knock, knockin' on heaven's door..." Quote: " I've always heard it recommended that when coolant gets in the oil, the main bearings should be replaced as well." So have I. Especially if the tractor has been run with coolant in the oil long enough to get a good guesstimate on the leak rate! True, Steinbeck said, "Bearings can knock until (the Lord) comes." But he was writing FICTION! I think your most realistic option at this point is to borrow a tractor from a neighbor to do your plowing, unless you can get the tractor rebuilt in time. Or, you can run it into the ground. It just may last long enough to do your planting and plowing and then when things are "laid by" you can do the rebuild then. But every cell in my Bohemian body recoils at the latter suggestion. You run the risk of doing a great deal of damage. It is infinitely more practical to borrow a tractor.
Replies:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
