Farmall & IHC Tractors Discussion Board |
Re: 756 pto seal
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on April 02, 2007 at 21:25:17 from (76.212.225.173):
In Reply to: 756 pto seal posted by paul finnegan on April 02, 2007 at 18:17:22:
Ya need a special spring compressor or a shop press and a special tool to compress the BIG spring inside and then ya can remove the clutch drum then ya can take it apart , Now the PTO brake is also spring loaded on the rear housing and can safely be removed with a couple longer bolts till the pressure is off then you are at the seal , now having the special tool for seal instulation is nice to have but you can get by with a deep well socket that fits the seal . Make sure that you drive it in correctly and put the oil slinger back in . Get a book and read the section on the PTO . Also when removing the PTO from the tractor it is best done with a cherrypicker and the top 3 pt. plate removed so you can see then as you come out you must tip the rear of the unit down so as not to bang bump the pickup tube as it can be damaged real easy.
Replies:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|