Re: 574 overheating

Posted by JayWalt on March 21, 2007 at 19:32:37 from (70.226.9.210):

In Reply to: 574 overheating posted by Grinder on March 21, 2007 at 17:36:24:

kinda odd. Make sure the mower is in good shape, no seized bearings, sharp blades.

I would also do a general cooling system check. Seems running a mower would be more demanding then using hydraulics every now and then to plow or run loader. The mower is a constant demand device, unlike the hydraulics.
What makes you say it overheats? temp gauge goes high or it boils over or what?

Sounds like more of inadequate cooling then anything having to do directly with the pto, its just a matter of the pto loads up the engine more then running a few hydraulic cylinders...

Clean out the radiator with compressed air, make sure the fan works, has the thermostat ever been replaced and so on..

Replies:

• Re: 574 overheating Boblang 03:28:06 03/22/07 (0)

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]