Farmall & IHC Tractors Discussion Board |
Re: 1066 help needed PLEASE!
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by the tractor vet on March 21, 2007 at 08:09:37 from (75.19.121.183):
In Reply to: 1066 help needed PLEASE! posted by RickyP on March 20, 2007 at 20:29:08:
Well what is happening here is (1) the sump check plug is not seating and allowen hyd. oil to drain back , (2) you clutch linkage is out of adjument along with the dump valve , (3) if ya had the MCV off did you loose the littel spring for the sump check plug? (4) did you get all the O/Rings put in . (5 ) if ya had the MCV off and ya did not TORQUE all the bolts to Spce's then you may have blowen a gskt. in the MCV and will now need to be taken apart and cleaned and inspected and all O/Rings and gskt.'s replaced . For the clutch adjuments go back into the archives and look them up as i have a fool proof way that i have posted many times on here as tryen to do it by the book does not work on older tractors with ware on the linkage but the way i have layed out works .
Replies:
Home
| Forums
Today's Featured Article -
Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|