|
Farmall Tractors Discussion Board |
51 Farmall H Update and website update
[ View Follow Ups ] [ Post Followup ] [ Return to Farmall Tractors Discussion Board ]
Posted by The Red, John Fritz on April 05, 1999 at 07:54:16:
The Finale page is updated on my site. The tinwork is now painted along with the seat parts. I got a new spring and shock absorber and another used seat bracket that was hardly weathered at all. I will probably replace the tin down the road. I have the light shells mounted and HOPEFULLY I have a good ground on each one. I did some carefull filing this time around to make sure I have a ground from the light base to the deck. I have to work on the oil pressure guage line. It is leaking at the base next to the oil filter. Might have to get another line. I drained the liftall yesterday. Good news, clean oil. Bad news, only 1/2 quart came out. Since it was hooked up, I bet I have damage to the pump. I will pull the rocker arm assembly tonight and re-torque the head bolts. I will of course re-check valve gap clearances when I re-install the rocker arms. At hour 10 I will change oil, filter, drain the water and add anti-freeze and prob. replace the water jacket inspection plate with one that is not as pitted. I will also drop the oil pan and apply red silicone sealer to the pan and gasket. At the end of this week I will add the decals. I have spent 40 hours over the last 4 days and I am tired. I came to work to rest. :)
Follow Ups:
Post a Followup
|
