Posted by charles todd on March 17, 2009 at 15:53:34 from (205.242.95.137):
I have heard some members here talk of blending WMO with diesel... Is this a good idea? I ran some through a 70 mesh paint filter and a funnel with a screen. It seemed clean of most larger particles but was still BLACK. This told me that there was still contaminates in it. I did mix 1qt in 5 gallons of diesel for grins...
If one built a device with a pressurized tank and forced the oil through a spin-on filter at lets say 10 psi, would the "clean oil" be suitalble to burn in a diesel engine at lets say 20% mix? Would it be ok to re-use in an engine? Maybe use one filter to clean the particles out and one to remove water?
I know that suposedly one can reclaim synthetic forever if it can be cleaned. I use synthetic in everything but the tractor and riding mower. I hate to use the WMO, waste hydraulic oil, and waste transmission oil only for burning brush and stumps... It must have some value. Before anyone says a "oil furnace" it rarely gets below 35 here.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Box Plow Blues - by Tom Schwarz. One of the first implements most tractor owners obtain is the box plow. For very little money, this piece of equipment promises to plow and flatten any hill or vale on your ranch road or farm. At least that's what I thought! As simple as a box plow appears, it can be rather challenging to make work correctly. In our sandy soils of Florida, traction is king. You can never have wide enough tires or heavy enough weights to get all the traction you want … unless you own a monster tractor. U
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.