Farmall & IHC Tractors Discussion Board |
Re: 706 TA
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by right said fred on December 11, 2001 at 19:39:57 from (12.81.199.17):
In Reply to: 706 TA posted by bryan on December 10, 2001 at 13:42:37:
During one of my economy phases I took out one of these TA's and replaced just the sprag clutch ($100). But if you have slippage in high, you're looking at a rebuilt unit, I think about $750. While apart you also will want to do the clutch and IPTO gear, another $350 or so. Find a local private shop that has done these tractors before. Labor will be around $1000. A dealer doing this job would be around $4000, plus they (and other shops) like to fix anything else they find wrong, not just because they want the business, but they don't want a tractor leaving the shop and breaking right away, so it can be financially painful to take an old tractor into the shop and feel obligated to fix it right. The hydraulics that squeeze the high range clutches in this unit are the same hydraulics that steer and brake the tractor, so check the steering and brakes at a low rpm. If they are good it is likely the hydraulics are good enough to work the TA.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|