Farmall & IHC Tractors Discussion Board |
Re: Governer help
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jim on November 23, 2001 at 04:59:42 from (62.7.142.209):
In Reply to: Governer help posted by Larry on November 21, 2001 at 07:50:40:
I have never worked on an F-14 tractor, but have had simular experiences with governors on other IH tractors. Check to see if the weights/flyballs are able to move freely. If they don't, a fairly cheap and easy fix is to get a can of WD-40 and spray the shaft and weights. Let it soak and spray it some more and it shouldn't take too many times before the governor starts to working properly. This is something that is almost common on Farmall H's and M's that are not used on a very regular basis. I have had to do this a few times and it worked for me. It would also be a good idea to change the engine oil and filter soon after completing this.
Follow Ups:
Home
| Forums
Today's Featured Article -
Choosin, Mounting and Using a Bush Hog Type Mower - by Francis Robinson. Looking around at my new neighbors, most of whom are city raised and have recently acquired their first mini-farms of five to fifteen acres and also from reading questions ask at various discussion sites on the web it is frighteningly apparent that a great many guys (and a few gals) are learning by trial and error and mostly error how to use a very dangerous piece of farm equipment. It is also very apparent that these folks are getting a lot of very poor and often very dangerous advice fro
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|