|
Farmall & IHC Tractors Discussion Board |
Clarence's upset stomach - or crunching gear teeth on 46 H
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Jim on November 05, 2001 at 11:01:44 from (205.174.40.25):
Last Friday on Tales Board posted inquiry on what may have happened with my '46 H's trans as the nieghbor called to mentioned they hit a stump and the trans went out - will we did exploratory surgery Sunday - they pulled the hood, fuel tank, belt pulley, steering column and finally when I got there helped with pulling the deck over the trans - the lower drive pinion gear (believe they call it), was missing half it's teeth and 4th gear was missing about four - seems like they were in 4th when they hit the stump and busted a gear tooth on the 4th gear which then sheared off about half the drive gear teeth. Picked out several gear teeth laying around inside the trans. Good news is the rest of the trans looked great, even the side rails for the oil flow where actually really clean for 56 years of use. The neighbor will pick up the new gears and check the bearings, in the meantime he will flush out the trans. I picked up new gear oil as I wanted to change it anyway and no need for him to pay for that. Hopefully Clarence will be up and running great again after surgery. Now if the new trucks we buy would last half as long GM and Ford would be out of business.
Jim
Follow Ups:
Home
| Forums
Today's Featured Article -
Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
