Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: Re: M clutch problems
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on October 15, 2001 at 06:07:49 from (129.37.117.207):
In Reply to: Re: Re: Re: Re: Re: M clutch problems posted by Jeff on October 14, 2001 at 16:04:56:
I already mentioned the front transmission seals which can be replaced while you have the Lift all and the clutch out. Only other thing in there is the Lift all which you can fix while you have it out. Do you know if it works at present?? Your leak is probably the Shaft seal. It is replaced by unscrewing the shaft coupling, popping out the old seal and pressing in the new one. The hard part is breaking loose the shaft coupling to get it to unscrew. The local clutch/brake shop charged me $141.50 about a year ago to rebuild my clutch, including new facing on the disk, new springs in the pressure plate and a new throw out bearing. Removal of the clutch is not as bad as it sounds. IT took me more than a day, but it was because I did not have good instructions on the sequence and what had to come out first to get the clutch out. I could take one out now in a couple hours, I think. Just be ready to get plenty of dirt and grease on yourself.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|