Farmall & IHC Tractors Discussion Board |
Re: 3PT HITCH
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by RayP(MI) on October 03, 2001 at 13:14:01 from (216.46.197.250):
In Reply to: 3PT HITCH posted by BPREAS on October 03, 2001 at 08:48:22:
There are available conversion kits which attach to the fast hitch by sliding into the existing arms just like the 2-point impliments. A bracket for the top link attaches to the rear of the tractor above the power-take off, and you're in business. So, really, there's no reason you could not use 2 point impliments. See the worksaver.com for their line of conversion kits. They have some good drawings that should answer your questions. Two points, I found that the top link they provided was too long, and I had to find a source of a shorter one. Secondly, the 2 point hitch has no provision for adjusting the width between the arms, so you have to choose your impliments to fit the existing width, or shim the impliment attachment pins to fit. I have the adapter on a farmall 200, and it works fine.
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|