Farmall & IHC Tractors Discussion Board |
Re: Red, Bob M or anyone with valve advise
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob M on October 02, 2001 at 10:06:07 from (165.170.128.66):
In Reply to: Red, Bob M or anyone with valve advise posted by Paul Shuler on October 02, 2001 at 09:45:45:
Hi Paul - Best to set the valves with the motor fully warmed up. I do it with the motor stopped: Turn the crank so #1 is on TDC firing (both valves closed) and adjust the #1 valves. Now turn the crank exactly 1/2 revolution and set #3 valves. Another 1/2 turn and do #4, and finally one more 1/2 turn and do #2. My father in law on the other hand sets his with the motor at idle. It works fine, but I'm not real fond of working that close to a hot manifold, spinning fan blade, moving generator belt, etc. (Still got all my fingers and would like to keep it that way!) ...Bob M
Follow Ups:
Home
| Forums
Today's Featured Article -
The Rescue of a Fordson F - by Anthony West. Introduction I live in the UK and have for many years restored Fordson tractors (in the main model N's). I have also restored and shown model F's, E 27N's, Field Marshall Series 2, David Brown Cropmasters and the old rey Fergeson T 20. At one time I had seven restored examples which were shown and used in ploughing matches. As most restorers, I have a number of war stories I can relate on a range of topics that may help other like minded and interested people. Perhaps my first p
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|