Farmall & IHC Tractors Discussion Board |
Re: Bent rockshaft rod
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tyler (MD) on August 15, 2001 at 15:55:44 from (207.172.73.225):
In Reply to: Bent rockshaft rod posted by Nyles Crawford on August 15, 2001 at 05:33:22:
David A of this forum told me to do this: >>Hey Tyler, Regarding that bent rod, I found an easy way to straighten it. Mine was also bent to the point of hitting the fender. Take the rod off and use it like a pry bar up against the drawbar. You can also stick it through one of the holes in the drawbar and pry. The tractor makes a good immovable object to pry against. The bar should have two bends in it, one near the front and one near the rear. You will see them. This job took me about 15 min. Now it is perfect. David<< HTH, Tyman
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|