Farmall & IHC Tractors Discussion Board |
Re: Can hole in exhaust manifold cause burnt valve and missing?
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Bob M on June 14, 2001 at 05:03:04 from (192.232.119.194):
In Reply to: Can hole in exhaust manifold cause burnt valve and missing? posted by Will on June 14, 2001 at 03:34:38:
I agree with The Red and Bill. One more possibility however: A hardened exhaust valve seat (if the motor has 'em) worked loose. This will cause cause the valve to burn in short order. I've encounted into this a couple of times - though only on engines with aluminum heads. For what it's worth, we've got an M and a pair of 6-cyl Olivers, all with cracked and leaking exhaust manifolds. They've accumulated hundreds of hours of work at full load without a hint of valve problems. The slightly reduced exhaust back pressure caused by the leak has no bearing on valve burning - if anything it gives the motor a fraction of a HP more power!
Follow Ups:
Home
| Forums
Today's Featured Article -
Talk of the Town: Repairin a Gas Tank - by Staff. This interesting discussion is from the Tool Talk Discussion Forum. Remember that safety is your first priority - make sure you know what you are doing before attempting a potentially dangerous activity!
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|