Farmall & IHC Tractors Discussion Board |
Re: f11 loader on 806
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Sam C. on May 24, 2001 at 11:56:07 from (129.82.219.11):
In Reply to: f11 loader on 806 posted by shelly on May 23, 2001 at 18:21:19:
When you say it is blowing the seal, is that seal on the pump, or is it where the hose connects? Have you had it running properly and now are having this problem, or is this the first try? One of the things I was cautioned when I got a F11 was to be sure the spool had a pressure relief and I think an "open center". The idea is the pump continuously circulates the hydraulic fluid through the spool, and when you move a valve it gets redirected to that cylinder. If you had the wrong type of spool the fluid would not be able to pass through the spool back to the resevoir when you are not operating a valve, and it would blow the weakest point between the pump and the spool. This is why I'm wondering if you have had it operating correctly before this problem. I'm venturing way beyond my limits here - hopefully someone will straighten me out if I'm too far off base! Good luck! Sam C.
Follow Ups:
Home
| Forums
Today's Featured Article -
Chores - by Frank Young. The ceaseless passing of time! It is at once our friend and our enemy. It measures our progress and it makes us old. Like most features of our life, few things are all good or all bad, and most such judgments depend on our own perspective or viewpoint. In our particular hobby, we enjoy the nostalgic return to the days of our youth as we recreate many of the scenes that took place on the family farm that served as the stage for the first few acts of the play that is our live
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|